Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Sarah Westberg

Modification approuvée par Sarah Westberg

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Use a Phillips #1 screwdriver to unscrew one 7.0 mm screw from the hard drive/RAM panel.
-[* icon_note] You cannot remove the screw from the panel. Simply unscrew it until it is loosened.
+[* red] Use a Phillips #1 screwdriver to loosen the single 7.0 mm screw from the hard drive/RAM panel.
+ [* icon_note] You cannot remove the screw from the panel. Simply unscrew it until it is loosened.
[* black] Pull the cover towards you and up from the device to remove it.
-[* icon_note] Hearing a popping noise while wedging the plastic opening tool is normal.
+[* black] If the cover does not come off easily, use an opening tool or spudger to gently pry the cover up.
+ [* icon_note] Hearing a snapping noise while removing the hard drive/RAM cover is normal.