Modifications apportées à l'étape #4
Modifié par Dianxing Yang —
Modification approuvée par Dianxing Yang
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Open the front panel | |
| - | [* black] The front cover consists of a dust cloth made of black metal mesh and black translucent soft fabric with black sponge tape glued around the lining. |
| + | [* black] The front cover(60g) consists of a dust cloth made of black metal mesh and black translucent soft fabric with black sponge tape glued around the lining. |
| [* red] Use a pry bar or one screwdriver to open it along the edge. You can find 11 non-removable rivets on the back holding the logo. Use Flat Needle Nose Pliers to break off the rivets and remove the logo. | |
| [* orange] Panel length: 131mm | |
| [* green] Panel width: 151mm | |
| [* yellow] Panel thickness: 12mm | |
| [* blue] Logo length 75mm & width: 20mm | |
| [* violet] Logo spacer length: 75mm & width 17mm |