Modifications apportées à l'étape #7
Modifié par Dianxing Yang —
Modification approuvée par Dianxing Yang
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Take off the casing | |
| [* violet] Remove the right main control board module by hand vertically upwards, this control board is removed from the charging control board below. | |
| [* black] Let's remember where each wire is connected. | |
| [* red] Connect to the top control board | |
| [* blue] Bluetooth signal cable | |
| [* orange] Front and back paper cone full-range speaker connections. Note: The control panel is labeled "REAR" (2pin) and "FRONT" (3pin). | |
| - | [* yellow] |
| + | [* yellow] [link|https://www.punktkilde.com/fsb021030-0400|Thin Series Woofer|new_window=true]connect(2pin) |
| [* green] Cables for connecting the battery |