Modifications apportées à l'étape #7
Lignes de l'étape
| [title] Dismantling the Heating Cone release switch | |
| [* black] The release switch was slider mechanism that could just be snapped off. Bottom part of the switch was screwed into the base. | |
| [* yellow] Top switch length: 35mm | |
| [* green] Top switch width: 23mm | |
| [* light_blue] Bottom switch length: 49mm | |
| [* violet] Bottom switch width: 23mm | |
| [* orange] Bottom switch height: 15mm | |
| - | [* red] Screw |
| - | [* blue] Screw |
| + | [* red] Screw head diameter: 10mm |
| + | [* blue] Screw shaft length: 8mm |