Modifications apportées à l'étape #10
Lignes de l'étape
| + | [title] Separating the Base (2) |
|---|---|
| + | [* black] Later halfway sawing through, I realise that under the Hippo Deluxe brand sticker, there were two screws (same as the ones used to screw in the base) that needed to be unscrewed to separate the two parts. |
| + | [* green] Base length: 270mm |
| + | [* red] Base width: 225mm |
| + | [* yellow] Bottom Base height: 100mm |
| + | [* blue] Top Base height: 90mm |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté
Image 3
Aucune image précédente
Ajouté