Modifications apportées à l'étape #1
Modifié par Sam Gustafson —
Modification approuvée par Sam Gustafson
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [title] Remove front leatherette |
|---|---|
| + | [* black] Use isopropyl alcohol to soften the adhesive along the edge of the leatherette. |
| + | [* black] Use a dull spudger or scraper to peel off the covering. |
| + | [* red] Turn the self timer lever to the 9 o'clock position. |
| + | [* black] Loosen the entire right side leatherette in the same manner, then work it over and around the self timer lever to remove. |
| + | [* icon_note] ''Installation Notes:'' Use contact cement to reattach the leatherette. This should be the very last step in reassembly, after the camera has been fully tested. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté