Modifications apportées à l'étape #2
Modifié par Dave Empson —
Modification approuvée par Dave Empson
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Remove the lid and invert it and place on jug. |
|---|---|
| + | [title] Turn lid up-side-down |
| + | [* black] With the mains disconnected, remove the lid and invert it and place on jug as shown. |
| [* black] Note that there are 4 pins on the lid section and 4 holes in the jug section (yellow arrows) | |
| - | [* black] Spray some electrical contact cleaner on the 4 pins and replace the lid section about 20 times, so that that contacts rub against each other numerous times to remove any residue. |
| - | [* black] Wipe away any |
| - | [* black] Hopefully the soup maker will now come on when plugged |
| - | [* black] If the soup maker does not turn on, repeat the cleaning process with the contact cleaner. |
| + | [* black] Spray some electrical contact cleaner on the 4 pins and replace the lid section on the jug about 20 times, so that that the electrical contacts rub against each other numerous times to remove any non-conducting residue. |
| + | [* black] Wipe away any liquid and allow to dry (for an hour or so?) |
| + | [* black] Hopefully the soup maker will now come on when plugged into the mains. The buzzer should sound and the LED lights should flash awaiting the mode button to be pressed. |
| + | [* black] If the soup maker does not turn on, disconnect from mains and repeat the cleaning process with the contact cleaner. |