Modifications apportées à l'étape #3
Modifié par Dave Empson —
Modification approuvée par Dave Empson
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] If cleaning the contacts in the previous step did not work, remove the 13 screws to split the lid in two as shown in the image and replace the lid (with mains turn off!) |
|---|---|
| + | [* black] With a multimeter, measure the resistance between the two terminals marked with green arrows. It should be about 60ohms. |
| + | [* black] If the resistance is much higher then either the contacts need more cleaning, or the thermal fuse/ heating element has failed (not covered by this simple guide) |
Image 1
Aucune image précédente
Ajouté