| - | [* black] To disconnect the red cable, press down on the black cover where a button-like mechanism will separate the cable from the heat sensor. |
|---|
| - | [* black] While pressing down, pull away from the device, you may want to use pliers if your grip starts to slip or if you can't find the "button" |
|---|
| - | [* black] If none of the above works, you may cut away the insulation to reveal the mechanism as shown (it does not need to be removed from the device, but it may make the process easier). |
|---|
| - | [* black] Afterward, you may need to reapply the insulation by heating the rubber to meld around the mechanism or by applying electrical tape 3-6 times around the connection point. |
|---|
| + | [* black] Push the cylinder out |
|---|
| + | [* black] Apply force to the hook on the connectors to take off the wires |
|---|