Modifications apportées à l'étape #5
Modifié par Sam Gustafson —
Modification approuvée par Sam Gustafson
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [title] Installation Notes: Speed Selector |
|---|---|
| + | [* black] Cock the shutter. |
| + | [* red] Check that the pallet and delay rods are properly coupled with the slow speed governor and seated in their pivot holes. |
| + | [* orange] Check that the upper levers of the rods are in the correct positions around the wind gears. |
| + | [* yellow] Place the high speed cam on top of the wind gear. Make sure the driving peg rides in the slot of the cam. |
| + | [* black] Set the speed selector to 'B'. |
| + | [* icon_note] Lot's of different pieces have to be aligned all at once when the speed selector is installed. Do not tighten down the mounting screws until everything is in place. Work patiently and carefully. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté