Modifications apportées à l'étape #8
Modifié par Sam Gustafson —
Modification approuvée par Sam Gustafson
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Installation Notes: Transport Gears | |
| [* icon_note] Make sure the shutter is in the wound state when installing the transport gears. | |
| [* black] Clean the transport gears and the mounting post with isopropyl alcohol. Do not lubricate. | |
| - | [* red] There is a detent on the bottom of the lower transport gear that is held by a latch. |
| + | [* red] There is a detent on the bottom of the lower transport gear that is held by a latch when the shutter is cocked. |
| [* orange] Pull the latch out and push the lower transport gear all the way down so it can properly catch the detent. | |
| [* yellow] Install the upper transport gear such that the gap on the right side of the latch is as small as possible without touching. |