Modifications apportées à l'étape #5
Modifié par Spencer Day —
Modification approuvée par Spencer Day
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Disconnect the power button cable | |
| - | [* black] Insert wisdom here. |
| + | [* black] Use the pointed end of a spudger to depress the metal tab on the side of the power button cable's board connector. |
| + | [* black] With the metal tab depressed, use a pair of tweezers to pull up on the pull tab to disconnect the power button cable from the center chassis. |
| + | [* icon_caution] Pull only on the pull tab, not the cable itself. |
| + | [* icon_caution] Don't pull on the cable without depressing the metal tab, otherwise you risk damaging either the cable or the connector. |
| + | [* icon_reminder] During reassembly, the cable should lightly "snap" into place when inserted. |