Modifications apportées à l'étape #1
Modifié par KyreseAguilar —
Modification approuvée par KyreseAguilar
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Unscrew the singular 1cm singular screw holding the grate at the top using the TR10 screwdriver. | |
| [* yellow] Using the prying tool, carefully work along the outer edges to remove the inner clamps to remove the grate. | |
| [* icon_note] These clamps can be difficult to remove, but releasing 2 clamps on the same side should allow you to easily remove the grate. | |
| [* black] Set aside the grate, as this will be one of the last steps for reassembly. | |
| - | [* black] Move onto Step 2 |