Modifications apportées à l'étape #2
Modifié par Sarah Westberg —
Modification approuvée par Sarah Westberg
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Use a spudger to pry the driver from the headphones but don't pull it or yank it off as it is connected by wire cables and could rip those out. | |
| - | [* red] Use a Phillips #0 screwdriver to remove the four 2 mm screws from the small circuit board. |
| + | [* red] Use a Phillips #0 screwdriver to remove the four 2 mm screws from the small circuit board in the housing. |
| + | [* icon_note] You will be able to desolder the driver wires more easily once the board is removed. |