Modifications apportées à l'étape #7
Modifié par Ben Moores —
Modification approuvée par Ben Moores
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Remove Mount Ring | |
| [* black] Using PH0 Screwdriver remove the 4 screws attaching the mount ring to the lens. | |
| [* icon_note] There is a small amount of threadlock on these screws. | |
| - | [* icon_note] Screws: 4@ M1. |
| + | [* icon_note] Screws: 4@ M1.6 x 6 (white threadlock) |
| [* black] Carefully lift the mount ring. The lens sealing gasket may have adhered to it and lift as well. This is ok. | |
| [* black] Remove the lens sealing gasket, and two metal shims. | |
| [* icon_note] Note the profile on the gasket. The longer bevelled edge faces outwards. | |
| [* icon_note] The metal shims are identical so can be replaced in any order. | |
| [* icon_note] Note the plastic pillars to align the parts. |