Modifications apportées à l'étape #10
Modifié par Ben Moores —
Modification approuvée par Ben Moores
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Remove PCB | |
| [* black] Using a PH0 Screwdriver unfasten the 3 screws holding the PCB. Turn each screw alternately a little at a time to avoid warping the PCB as it rises. | |
| [* icon_note] Note the rubber isolating bushings and how the PCB slits into them. | |
| [* icon_note] The rubber bushing will come off with the screws | |
| - | [* black] Note the shape of the PCB allows it to slide out horizontally. Take care to avoid catching the FPCs. |
| + | [* black] Note the 'C' shape of the PCB allows it to slide out horizontally. Take care to avoid catching the FPCs. |
| [* black] Place the PCB in an ESD safe bag | |
| [* icon_note] PCB Markings: XL1406 MAIN Rev05 |