Modifications apportées à l'étape #12
Modifié par Ben Moores —
Modification approuvée par Ben Moores
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [title] Remove |
|---|---|
| + | [title] Remove Zoom Ring - Outer |
| [* black] Using a PH0 Screwdriver (you may need to use a PH00 if the shaft is too thick to fit) remove the 3 deeply recessed screws in the zoom ring. | |
| [* icon_note] When reassembling note the ridges on the zoom ring that fit into slots on the body. This is what transfers the torque from the ring to the body. | |
| [* icon_note] Screws: 3@ M1.2 x 4mm wafer head (black) | |
| [* black] On this lens the rubber grip on the zoom ring was loose. Rotate the bodies zoom mechanism to the 50mm position (or 150mm), and then with the slots and ridges lined up, work out the correct position for the rubber grip by rotating it against the body. It appears to have been originally glued, but it can be repaired with some thin double sided tape. |