Modifications apportées à l'étape #17
Modifié par Ben Moores —
Modification approuvée par Ben Moores
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] iFn Sleeve removal | |
| [* black] Using a PH0 Screwdriver remove the 3 silver screws holding the iFn sleeve onto the body. Do not separate yet. | |
| - | [* icon_note] Note the plastic shims that will come apart with this. |
| + | [* icon_note] Note the plastic shims that will come apart with this. The black one is inner (towards the front of the lens), and the clear one outer (towards camera). |
| [* black] Lie the lens on its side, and gently and gradually pull the front of the lens away from the body exposing a FPC Ribbon cable. Disconnect the cable from the connector and then finish separating the parts. | |
| [* black] Screws: 3@ M1.4 x 4mm Wafer head (thread lock) | |
| [* icon_note] FPC Ribbon: XL1406_MF_PI_FPC_Rev04 |