Modifications apportées à l'étape #30
Modifié par Ben Moores —
Modification approuvée par Ben Moores
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [title] Cable Analysis |
|---|---|
| + | [* black] From the connector pinout we can follow the traces |
| + | [* black] Pin 1 (with white dot) - Pin 4 : These go to three traces in the flex PCB, and go towards the sensor. |
| + | [* black] Pins 5-8 : These go to the motor |
| + | [* black] The wider copper strips on the outside and middle are not connected. |
| + | [* black] The flex ribbon is 0.07mm thick, but there is at least 1mm gap between the focus elements and the inner barrel wall. |
| + | [* black] As there are two weak spots (orange boxes) in the cable, the repair needs to run from before the first to after the second. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté
Image 3
Aucune image précédente
Ajouté