Modifications apportées à l'étape #33
Modifié par Ben Moores —
Modification approuvée par Ben Moores
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [title] |
|---|---|
| + | [title] Manufacture new Flex PCB |
| [* black] After the initial failed repair attempt using thin wire, a Flex PCB was designed to splice into the stubs of the original flex PCB going to the motor and sensor. | |
| [* black] JLCPCB.com was used to make the cables, but other suppliers could be used. The second picture shows the manufacturing details. | |
| + | [* black] See https://github.com/mostlyhorses/XL1406_AF_FPC_SPLICE for the PCB gerber files |
| + | [* icon_note] You will want at least 3 cables so you have something to practice on. |