Modifications apportées à l'étape #1
Modifié par Sarah Westberg —
Modification approuvée par Sarah Westberg
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Use a keycap puller or your fingers to gently pull off the keycap. | |
| [* icon_caution] Avoid using excessive force to avoid damaging the switch. | |
| [* black] Lift the keycap evenly and straight up from the keyboard. | |
| [* icon_note] If you are not using a keycap puller you may need to wiggle the cap slightly to loosen it. | |
| - | [* icon_reminder] Clean the keyboard using an air blower or a soft brush to remove any debris or dust between the switches. |
| + | [* icon_reminder] Clean the keyboard using an air blower and a soft brush to remove any debris or dust between the switches. |
| + | [* icon_reminder] Align the new keycap with the switch stem, ensuring the small cross-shaped hole at the bottom of the keycap matches the stem. Once aligned, gently press down on the keycap until it snaps securely into place. |
| + | [* icon_note] You'll hear a soft "click" sound or feel resistance when it’s properly seated. |