Modifications apportées à l'étape #2
Modifié par Sam Gustafson —
Modification approuvée par Sam Gustafson
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Remove main PCB | |
| - | [* red] Remove two 2.3 mm #00 screws. |
| + | [* red] Remove two 2.3 mm #00 screws holding the viewfinder LEDs. These will need to be properly aligned during reassembly. |
| [* orange] Remove one 2.3 mm #00 screw. | |
| [* yellow] Pull or pry off one 3.7 mm plastic retaining post. | |
| [* green] Remove one 2.3 mm #00 screw. | |
| [* light_blue] Pull or pry off one 2.8 mm plastic retaining post. | |
| [* black] Gently pull main PCB away from mirror box housing. |