Modifications apportées à l'étape #4
Modifié par Katie DeLaurentis —
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Gently lift the logic board. |
|---|---|
| - | [* icon_caution] Caution: Do not pull to hard and damage the white ribbon cable. |
| - | [* black] Pull the white ribbon cable parallel to the logic board using a Spudger to remove the cable. |
| + | [* black] Gently lift the the logic board. |
| + | [* icon_caution] Be careful not to pull too hard and damage the white ribbon cable. |
| + | [* black] Place the Spudger so that it is between the logic board, the white ribbon cable, and the rest of the camera. |
| + | [* black] Remove the white ribbon cable by pulling the Spudger away from the camera, keeping it parallel to the logic board. |