/
Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
S'inscrire
Connexion

Modifications apportées à l'étape #2

Modifié par Cole O'Neal —

Modification approuvée par Adam O'Camb

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Starting from the bottom corner using the thin blunt side of a Spudger I separated the back from the metal bezel. THIS CAN CAUSE COSMETIC & INTERNAL DAMAGE if you are not careful.
-[* black] You could use a thumb nail, plastic spudger, or pry tool to move up one side releasing the plastic clips. Then raise the other side and the top should pull off with ease.
-[* black] NOTE: During reassembly the back may fight a little to go back on. Start from the side and go around do not be afraid to pinch it with a little muscle.
+[* black] Starting from the bottom corner, use the thin blunt side of a Spudger to separate the back from the metal bezel. THIS CAN CAUSE COSMETIC & INTERNAL DAMAGE if you are not careful.
+[* black] Use a thumb nail, plastic spudger, or pry tool to raise one side releasing the plastic clips. Then raise the other side and the top should pull off with ease.
+[* icon_note] During reassembly the back may fight a little to go back on. Start from the side and go around do not be afraid to pinch it with a little muscle.