Modifications apportées à l'étape #7
Modifié par Elizabeth Zapata —
Modification approuvée par Adam O'Camb
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] At the other end |
|---|---|
| - | [* black] This small control board is also held down by a little adhesive but can be carefully pried up |
| - | [* black] In the third picture marked in the Green square is a piece of plastic that is |
| + | [* black] At the other end 2 big flex cables are brought together by a small control board. Disconnect the 2 clips (Green - LCD Orange - Digitizer) and, the other ends of the antennas. Then remove the antenna wires completely. |
| + | [* black] This small control board is also held down by a little adhesive, but can be carefully pried up. |
| + | [* black] In the third picture, marked in the Green square is a piece of plastic that is kind of attached to the board. It is better to just pry it up with the board than disconnect it. |