Historique de l'étape n° 8 de LG G2 Teardown

	[* black] We should now have removed the 2 big flex cables attached to their respective and mutual boads. The 2 antenna wires and be removing the main logic board.
	[* black] We can now start the process of removing the battery. Of all the things held down by adhesive in this device the battery is the most difficult thing to remove. Using a flat plastic pry tool pry up the edges of the battery and work you way to the middle from all sides
-	[* black] CAREFUL not to bend the battery to much i can not stress how well this battery is held in but be patient and just work at it
+	[* black] CAREFUL not to bend the battery too much i can not stress how well this battery is held in but be patient and just work at it. Another method is using two long thin and flat plastic prytools to "cut" the adhesive and pry between the battery and body of the phone starting at the USB end. Don't risk a lithium fire by poking a hole in the battery!
	[* black] NOTE: when reassembling you could used a counter top and something flat to flatten the battery back out
	[* black] The third pic is what we should have after the battery is removed