Modifications apportées à l'étape #5
Modifié par Kari Bachman —
Modification approuvée par Kari Bachman
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Make note of how the wires |
|---|---|
| + | [* black] Make note of how the wires connect to the components to aid reassembly. |
| [* black] Then remove the connectors (spaded lugs) from the circuit components as shown in the second image. | |
| [* icon_caution] ''DO NOT pull on the wires as you might pull them out of the connectors.'' | |
| [* black] You should be able to remove the connectors easily by hand by pinching the lug between your fingers and pulling in the direction of the attached wire.. | |
| [* black] If necessary, you can you needle-nose pliers to grasp the lug shank firmly and then gently pull the lug in the direction of the attached wire. | |
| [* black] Gently bend the disconnected wires back and out of the work area. |