Modifications apportées à l'étape #7
Modifié par Kari Bachman —
Modification approuvée par Kari Bachman
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Using your hands, grasp the wire that is still connected to the power supply. Carefully lift the power supply off the threaded stud to which it was coupled. | |
| - | [* icon_note] At this point you will have removed three pieces from the kettle: |
| + | [* icon_note] At this point you will have removed the following parts from the kettle: |
| + | [* black] Five (5) screws. |
| + | [* black] The kettle base. |
| [* black] One (1) 7/32'' hex nut. | |
| [* black] One (1) 7/32" split-ring lock washer. | |
| [* black] One (1) power supply unit. |