Modifications apportées à l'étape #3
Modifié par Erik Miller —
Modification approuvée par Erik Miller
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* |
|---|---|
| - | [* |
| - | [* icon_ |
| + | [* icon_caution] There is a ribbon cable attached to the back of the keyboard. Avoid lifting or moving the keyboard more than a couple inches before you disconnect the ribbon cable, or you may damage the cable. |
| + | [* black] Carefully pry up one of the top corners of the keyboard with a prying tool. Slide the tool along the top of the keyboard to release it from the housing. Pull the top of the keyboard towards you an inch or two. |
| + | [* icon_note] The keyboard may make some cracking noises as you pry it from the casing. This is normal and expected. |
| [* black] Pull the keyboard up and away from you, as it is held in by clips in the front. |