Modifications apportées à l'étape #1
Modifié par Andrew Bookholt —
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Insert the flat end of a spudger between the thin rubber strip surrounding the front display bezel and the rear display bezel. |
| + | [* icon_caution] ***Do not*** try to insert the spudger between the thin rubber strip and the plastic face of the front display bezel. |
| + | [* black] Use the flat end of your spudger to carefully pry the front display bezel away from the adhesive securing it to the rear display bezel. |
| + | [* icon_caution] Do not pry against the fragile glass LCD panel. Also, do not excessively bend the plastic as it may permanently deform. |
| + | [* black] Continue prying until the front display bezel is free along the right side of the display and behind the right clutch hinge. |