Modifications apportées à l'étape #2
Modifié par lauryshark —
Modification approuvée par Andrew Optimus Goldheart
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Lift the display up from its lower edge and rotate it toward the top of the Touch. | |
| [* icon_note] The next few steps require removal of components under where the display normally sits. Be sure to hold the display to avoid putting tension on the delicate display ribbon cable. | |
| - | [* red] Remove the seven Phillips screws securing the metal display tray to the rear panel. |
| + | [* red] Remove the seven Phillips screws securing the metal display tray to the rear panel. They may be very tight; watch carefully to make sure you don't strip them. |
| [* icon_note] The two darker screws belong in the two holes in the tray nearest the bottom edge of the Touch. |