Modifications apportées à l'étape #7
Modifié par R Trent —
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] All the parts disassembled. The adapter cable will probably come out as it doesn't seem to be attached directly, but removing it would have required bending the metal enclosure and I didn't want to mess with that. |
|---|---|
| + | [* black] I thought it interesting to note that the drive runs at 5V 0.62A when the enclosure states 5V 1A. I wonder where the other 380mA are going. |
| + | [* black] Also interesting to note: this is a Seagate drive, while the 250GB drive upgrade I mention in the description requires a WD drive. If I understood correctly, this is because the software to format the drive to be recognized by your 360 is written for the WD firmware. |
| + | [* icon_note] Again, for more info on how to make a 250 GB conversion, see the GamerWok article. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté
Image 3
Aucune image précédente
Ajouté