Modifications apportées à l'étape #5
Modifié par Cody —
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Remove the halogen lamp and the screws securing the metal heat shield below the lamp. |
|---|---|
| + | [* black] It is unlikely, but the safety switch (red square) may be completely broken and not making contact. If you have a multimeter that can measure conduction, touch the metal contacts that the two wires are going to and press the switch in to see if it makes contact. |
| + | [* black] If the switch doesn't work, you can remove this from the unit and connect the two wires via a wire nut or solder (and some sort of wire insulator, like heat shrink). |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté