Historique de l'étape n° 14 de Dell Streak Teardown

-	[* black] Sadly ~~for us~~, the Streak's LCD is ~~completely~~ adhered to the front panel ~~like~~ the ~~[guide\|3130\|iPhone 4\|stepid=15351]~~ and ~~cannot~~ be removed ~~intact~~.
-	[* icon_note] The LCD is bonded to the front panel to ~~help~~ increase the strength of the device and ~~to increase the~~ sensitivity of the capacitive touch panel.
-	[* black] The inner face of the front panel assembly isn't all that exciting. The ear speaker and vibrator motor can be seen near ~~it's~~ top edge.
+	[* black] Sadly, the Streak's LCD is permanently adhered to the front panel glass. However, that LCD/glass subassembly is held in the front panel with very strong 3M adhesive, and could be removed with enough careful prying.
+	[* icon_note] The LCD is bonded to the front panel glass to increase the strength of the device and sensitivity of the capacitive touch panel.
+	[* black] The inner face of the front panel assembly isn't all that exciting. The ear speaker and vibrator motor can be seen near its top edge.
	[* black] The touchscreen ribbon cable houses:
	[* red] Pixcir's [link\|http://www.digitimes.com/news/a20100111PD216.html\|controversial] Tango S32 Touchscreen controller
	[* orange] Atmel's ATmega168P 8-bit AVR microcontroller