Modifications apportées à l'étape #1
Modifié par Geoff Wacker —
Modification approuvée par Geoff Wacker
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [title] Remove the Base Cover |
|---|---|
| [* black] Make sure the display is closed. Then, flip the computer over so that you can see the bottom cover. | |
| - | [* red] Loosen the two 5 mm screws using a Philips head screwdriver, or the J0 bolt in the iFixit kit if you have it, on the upper edge of the Base cover. |
| - | [* icon_note] These two screws do not actually come out. You only need to loosen them. |
| - | [* icon_note] You use the same screwdriver for the remainder of the guides. |
| + | [* red] Loosen the two 5 mm Phillips #0 on the upper edge of the cover. |
| + | [* icon_note] These screws will stay captive to the case. |