Modifications apportées à l'étape #6
Modifié par Jacob Lucaci —
Modification approuvée par Jacob Lucaci
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Carefully lift and turnover the LCD Screen so that you are able to see the motherboard. |
|---|---|
| - | [* icon_caution] Treat the motherboard with care since it is very sensitive to static discharge. Remain grounded to avoid the release of static discharge by wearing a static bracelet. |
| - | [* red] Carefully disconnect the LCD Screen ribbon cable away from its ZIF connector with your thumb and index finger. You must make sure to have your thumb and index finger cover as much of the ribbon's width and as close to the ZIF connector as possible without touching the motherboard while pulling the ribbon out. line. |
| - | [* icon_caution] Be careful to not rip the ribbon wire when pulling it out. |
| + | [* black] Gently turnover the LCD screen so that the motherboard is exposed. |
| + | [* red] Carefully pull the ribbon cable straight out using your thumb and index finger. |
| + | [* icon_caution] The ribbon cable is fragile and will break if bent too much. |