Modifications apportées à l'étape #7
Modifié par Jameson Shockley —
Modification approuvée par Jameson Shockley
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove the 3mm |
|---|---|
| + | [* red] Remove the 3mm Phillips head screw that is between the circuit boards. |
| [* icon_reminder] The other screw was the 4mm screw that was between the circuit boards was taken off during step five of this guide. | |
| [* orange] Next remove the three 3.5mm Phillips head screws that are on the button circuit board. |