Modifications apportées à l'étape #10
Modifié par Ellen Shelton —
Modification approuvée par Ellen Shelton
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Use the plastic opening tool to |
|---|---|
| + | [* black] Use the plastic opening tool to separate the button circuit board from the shutter button and the settings dial housing unit. |
| [* red] Carefully disconnect the ribbon cable that is attached to the user buttons circuit board away from the ZIF connector that is attached to the motherboard. | |
| [* icon_caution] Be careful no the rip the ribbon cable out of the ZIF connector when removing. | |
| [* black] Remove the user button circuit board. |