Modifications apportées à l'étape #1
Modifié par Jarrod Belsick —
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* orange] Using a Phillips #00 Screwdriver, remove the six screws on the edge of the case. All six screws have a length of .144" and a |
|---|---|
| + | [* orange] Using a Phillips #00 Screwdriver, remove the six screws on the edge of the case. All six screws have a length of 0.144" and a diameter of 0.066". Two screws are found on each side of the camera, and the final two are found on the bottom. |