/
Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
S'inscrire
Connexion

Modifications apportées à l'étape #4

Modifié par James Loy —

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* icon_note] Hold camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
-[* black] Use the flat end of the spudger to lift up the top of the blue ZIF connector piece. Slide out the ribbon (the blue ZIF connector remains attached to the motherboard).
+[* red] Hold camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
+[* black] Use the flat end of the spudger to flip up the tab of the blue ZIF connector. Slide out the ribbon cable out.
[* black] Once the ribbon is removed the LCD screen can be rotated away from its initial position to reveal more screws underneath.
[* icon_caution] Do not pull LCD screen out or rotate past 180 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.