Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #4

Modifié par Jarrod Belsick

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* red] Hold the camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
[* black] Use the flat end of the spudger to flip up the tab of the blue ZIF connector. Slide out the ribbon cable out.
[* blackicon_note] Once the ribbon is removedremoved, the LCD screen can be rotated away from its initial position to reveal more screws underneath.
[* icon_caution] Do not pull the LCD screen out or rotate past 180 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.
[* red] Hold the camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
[* black] Use the flat end of the spudger to flip up the tab of the blue ZIF connector. Slide out the ribbon cable out.
[* blackicon_note] Once the ribbon is removedremoved, the LCD screen can be rotated away from its initial position to reveal more screws underneath.
[* icon_caution] Do not pull the LCD screen out or rotate past 180 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.