/
Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
S'inscrire
Connexion

Modifications apportées à l'étape #11

Modifié par Jarrod Belsick —

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* red] On the front side of the camera, there are two more ribbon cables that need to be released, one black ZIF connector and one blue ZIF connector, both located at the bottom below the lens.
-[* black] Use the flat end of the spudger to flip up the tab on the blue ZIF connector. Then pull out the ribbon cable straight out.
-[* black] Use the flat end of the spudger to flip up the tab on the black ZIF connector. Then pull out the ribbon cable straight out.
+[* red] On the front side of the camera, there are two more ribbon cables that need to be released, one black ZIF connector and one blue ZIF connector. Both are located at the bottom, below the lens.
+[* black] Use the flat end of the spudger to flip up the tab on the blue ZIF connector. Then pull the ribbon cable straight out.
+[* black] Use the flat end of the spudger to flip up the tab on the black ZIF connector. Then pull the ribbon cable straight out.