Modifications apportées à l'étape #1
Modifié par Jarrod Belsick —
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Flash Assembly should be loose from taking out the LCD, and all ribbon connectors have already been disconnected. |
|---|---|
| - | [* black] Rotate flash assembly if the flash assembly is not loose. |
| + | [* icon_caution] Before working on the flash assembly make sure the flash is completely discharged or pay attention to where your fingers are. The capacitor in the flash assempbly can hold a charge for a long time and it can shock you. |
| + | [* black] Flash Assembly should be loose from taking out the LCD and all ribbon connectors have already been disconnected. |
| + | [* black] While holding the camera with the lens facing you, carefully lift the flash assembly so the little nub at the top comes out of its groove. |