/
Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
S'inscrire
Connexion

Modifications apportées à l'étape #1

Modifié par James Loy —

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Locate two more connectors on the front of the motherboard. The first is a black connector directly below the lens. The second is a brown connector on the side of the lens.
-[* black] Use the Spudger to rotate the black tab up and pull the connector out that it was holding.
-[* black] Use the Spudger and pull each end of the brown tab directly out in the direction that the ribbon is going. You must unlatch both ends before the connector can pull out. Once both ends are unlatched, pull ribbon cable out.
+[* red] Locate two more ZIF connectors on the front of the motherboard. The first is a black connector directly below the lens. The second is a brown connector on the side of the lens.
+[* black] Use the Spudger to rotate the black ZIF connector tab up and pull the ribbon out that it was holding.
+[* black] Use the Spudger and pull each end of the brown ZIF connector tab directly out in the direction that the ribbon is going. You must unlatch both ends before the connector can pull out. Once both ends are unlatched, pull ribbon cable out.