Modifications apportées à l'étape #5
Modifié par Samantha Taylor —
Modification approuvée par Miroslav Djuric
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Place camera on opposite side of strap handle. ( |
|---|---|
| + | [* black] Place the camera on the opposite side of strap handle. (The wrist strap handle is located on the left side when facing the camera.) |
| [* black] Pry the casing apart with both hands by applying pressure to the top and the bottom of the camera. | |
| [* red] There is a small metal plate (on opposite side of the wrist strap handle) underneath the plastic covering which is loosely attached. This piece should be removed and set aside. | |
| [* icon_note] There is a rubber foam washer that separates the lens from the casing. This will fall off when the case is removed and should be stored safely. | |
| [* black] ***NOTE***: When reassembling ensure the back plate screw tabs are over the wrist strap attachment and the front plate screw tabs go under orange circuitry. |