Modifications apportées à l'étape #5
Modifié par Ben Shearer —
Modification approuvée par Adam O'Camb
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Place the right speaker console face up with the four speaker terminals situated above the 16 Ohm speaker like so. | |
| [* black] Make sure the red wire is connected to the far right terminal and the green wire is connected to the far left terminal; if this is not the case solder your wires into place. [[Topic:Soldering|Here is iFixit's soldering guide]] | |
| - | [* black] |
| + | [* black] If you had to solder any wires, test your headset before moving to the next step. |
| [* black] If your speaker is now working, put your headset back together. Otherwise, examine the wires for any damage or disconnections. | |
| [* black] Reconnect any damaged or disconnected wires and secure your wires into place with electrical tape. Here is our [guide|40024|wire repair guide]. | |
| - | [* black] |
| + | [* black] If you had to reconnect any wires, test your headset before moving to the next step. |
| [* black] If your speaker is now working, put your headset back together. Otherwise, continue to step 6. |