Historique de l'étape n° 5 de Repairing TRITTON Kunai Speakers

-	[* black] Place the right speaker console face up with the four speaker terminals situated above the 16 Ohm speaker like so. Make sure the red wire is connected to the far left terminal and the green wire is connected to the far right terminal; if this is not the case solder your wires into place. [[Topic:Soldering\|Here is iFixit's soldering guide]]
-	[* black] Test your headset if you had to solder any wires before moving to the next step. If your speaker is now working, good job, put your headset back together. If your speaker is still not working, examine the wires for any damage or disconnections.
-	[* black] Reconnect any damaged or disconnected wires then secure your wires into place with electrical tape.
-	[* black] Test your headset if you had to reconnect any wires before moving to the next step. If your speaker is now working, good job, put your headset back together. If your speaker is still not working, continue to step 6.
+	[* black] Place the right speaker console face up with the four speaker terminals situated above the 16 Ohm speaker like so.
+	[* black] Make sure the red wire is connected to the far left terminal and the green wire is connected to the far right terminal; if this is not the case solder your wires into place. [[Topic:Soldering\|Here is iFixit's soldering guide]]
+	[* black] Test your headset if you had to solder any wires before moving to the next step.
+	[* black] If your speaker is now working, good job, put your headset back together. If your speaker is still not working, examine the wires for any damage or disconnections.
+	[* black] Reconnect any damaged or disconnected wires and secure your wires into place with electrical tape.
+	[* black] Test your headset if you had to reconnect any wires before moving to the next step.
+	[* black] If your speaker is now working, good job, put your headset back together. If your speaker is still not working, continue to step 6.