Modifications apportées à l'étape #3
Modifié par Jeff Suovanen —
Modification approuvée par Jeff Suovanen
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] We start by removing the clamp screw that holds the two halves of the lightsaber together. |
|---|---|
| - | [* black] Something about the clamp bars. |
| - | [* black] Obi-Wan saw fit to include a charging port on his lightsaber. Lucky for us, he decided to use a standard DC barrel jack connector. |
| + | [* black] When we're all through ogling the crystal, we set out to open the saber itself. We'll start by unscrewing this clamp pin that secures the switch housing cover. |
| + | [* black] With the pin removed, we're able to lift the clamp brackets out with no trouble. |
| + | [* icon_note] It seems Obi-Wan saw fit to include a charging port on his lightsaber. Lucky for us, he decided to use a standard DC barrel jack connector. |
| + | [* black] Unscrewing this small retaining ring loosens the port from the housing cover. |