Modifications apportées à l'étape #3
Modifié par Taryn Kelley —
Modification approuvée par Taryn Kelley
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Cut the red and black wires connecting the speaker to the inside of the Jambox. | |
| [* icon_note] Do not cut too much of the wire from the Jambox, because the new speaker will need to be soldered to the same wire. | |
| - | [* icon_reminder] Detatch the round speaker from its square frame, and save the square frame for the replacement speaker. |
| + | [* icon_reminder] Detach the round speaker from its square frame, and save the square frame for the replacement speaker. |
| + | [* icon_caution] Use caution when operating a soldering iron due to extreme heat. |