Modifications apportées à l'étape #5
Modifié par Kenji Anzai —
Modification approuvée par Kenji Anzai
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Use the metal spudger to cut open the rubber covering the latch where it clamps onto the copper tab. |
|---|---|
| [* black] Unplug wire at heating element by first using the metal spudger to push the latch in and then pushing it out. | |
| [* icon_caution] Be careful when unplugging the wire as if it is done too forcefully it can damage the connection and make it difficult to connect a new motherboard |